Pioneer PRV-LX10 Service Manual page 140

1
2) Disc playback data (Page 2)
The internal data regarding disc playback are displayed. On this page, the error rate during disc playback can be confirmed.
To start measuring the error rate, enter Debugging Display mode then press the PLAY key on the remote control unit for
A
servicing. The results are displayed in the order of measured address and measured value.
The indication "XXXXXXXX_0.000000e+00" as shown in the figure below indicates the status before a measuring task starts.
To cancel measuring in progress, press the CLEAR key on the remote control unit for servicing.
Debug Information(DVD-Video) -page 2--
Libpdec.so Revision =
Error Rate : XXXXXXXX _ 0.000000e+00
(Loop Time) . .
B
:
:
C
D
E
F
140
1
2
Error rate indication
Measured error rate
Measured address
PRV-LX10
2
3
3
4
4