Pioneer PRV-LX10 Service Manual page 132

1
Details on the log file (service_info.log)
In the service_info.log file, detailed data on Service Info, which can be accessed by
A
selecting Function Menu, System, Information, then Service Info, are recorded, as shown
below:
<<<<< Start PRV-LX10 >>>>> Mon Oct 20 06:25:22 EDT 2003
-- HDD SMART:Val(Max)/Thrsh --<<Spare Sector>> fd(fd)/3f <<Sk ErrRate>> fd(fc)/00
<<Spdl Mtr Retry>> fd(fc)/9d <<W ErrRate>> fd(fc)/00 Lecel=0
!!!!!<<<<< PCI Access Error Count = 1 >>>>> (Date) Mon Oct 20 06:25:51 EDT 2003
!!!!!<<<<< PCI Access Error Count = 2 >>>>> (Date) Mon Oct 20 06:27:23 EDT 2003
<<Check HDD SMART Data>>:Mon Oct 20 06:28:15 EDT 2003
-- HDD SMART:Val(Max)/Thrsh --<<Spare Sector>> fd(fd)/3f <<Sk ErrRate>> fd(fc)/00
<<Spdl Mtr Retry>> fd(fc)/9d <<W ErrRate>> fd(fc)/00 Lecel=0
B
<<<<< Start PRV-LX10 >>>>> Mon Oct 20 06:30:43 EDT 2003
-- HDD SMART:Val(Max)/Thrsh --<<Spare Sector>> fd(fd)/3f <<Sk ErrRate>> fd(fc)/00
<<Spdl Mtr Retry>> fd(fc)/9d <<W ErrRate>> fd(fc)/00 Lecel=0
<<<<< Start PRV-LX10 >>>>> Mon Oct 20 07:09:38 EDT 2003
-- HDD SMART:Val(Max)/Thrsh --<<Spare Sector>> fd(fd)/3f <<Sk ErrRate>> fd(fc)/00
<<Spdl Mtr Retry>> fd(fc)/9d <<W ErrRate>> fd(fc)/00 Lecel=0
1 Time when the PRV-LX10 starts up
2 Data from "--HDD SMART:Val(max)/Thrsh--" to "Level=0" indicate SMART data regarding the built-in HDD confirmed when
C the PRV-LX10 starts up. The results of confirmation on SMART data are recorded in the log file when System is selected by
opening Function Menu then System, as well as at startup. The levels of self-diagnosis results are as shown below.
It should be noted that the descriptions of the levels are different from those used on the Function Menu.
For details, see "Levels of the self-diagnosis results of the HDD and measures to be taken for them."
0: Normal operation
1: Level calling for the user's attention (indicated as 0+ on the Function Menu)
2: Level calling for the user's attention (indicated as 1 on the Function Menu)
3: Warning symptoms of an HDD failure (indicated as 2 on the Function Menu)
4: On the brink of an HDD failure (indicated as 3 on the Function Menu)
5: HDD failure (indicated as 4 on the Function Menu)
3 A total number of errors generated on the PCI bus after the PRV-LX10 starts up is recorded (Each time the power is turned
D
on, the number of errors is counted from 0). If errors are frequently generated, it may because of a defective Motherboard
or PCI board, or poor connection caused by inappropriate installation of the PCI board. Error data are recorded in the log
file each time an error is generated. Error data are also indicated on the Service Info page, which can be accessed by
selecting Function Menu, System, Information, then Service Info, only when an error is generated (the first figure indicates
the level of the self-diagnosis results of the HDD, and the second indicates the total number of PCI bus errors).
4 Each time the unit starts up, and each time System is selected (select Function Menu then System), the level of the self
-diagnosis results of the HDD is confirmed and recorded in the log file. Data from "<<Check HDD SMART Data>>" to
"Level=0" are the results of confirmed SMART data to be recorded when System is selected (select Function Menu then
System).
E
F
132
1
2
PRV-LX10
2
3
1
2
3
3
4
4
1
2
1
2
3
4
4