Panasonic ICX Section 700 Technical Manual page 225

Section 700 - Operation
To retrieve a call parked at the originating extension from another extension:
1. Lift the handset or press the ON/OFF key.
Enter the Call Park Answer/Other Ext. access code (default
= 773 (UK/HK) or 773# [Taiwan, Malaysia, Indonesia]).
OR...
Enter the Call Park/Floating Hold Answer feature access
code (default = *9). (Version 3.0 and higher)
2. Dial the number of the extension that parked the call.
To park a call at another extension:
1. Press the HOLD key.
2. Enter the Call Park Transfer access code (default = 774
[UK/HK] or 774# [Taiwan, Malaysia, Indonesia]).
3. Dial the extension number to receive the parked call.
4. If necessary, page the party that needs to retrieve the call.
To retrieve a transferred call park:
1. At the extension with the transferred park call, lift the hand-
set or press the ON/OFF key.
2. Enter Call Park Answer/Self access code (default = 772
[UK/HK] or 772# [Taiwan, Malaysia, Indonesia]).
Hardware Requirements
• N/A
Considerations
• You cannot park more than one call at a time.
• No more than one Call Park Answer key may be assigned to a single telephone.
• If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
ICX-35-700
Action
Action
Action
ICX (International), issued March/1999
Chapter 6. DSLT Features
Result
Intercom dial tone
• Connected to parked call
Result
• Current call on hold
Result
Intercom dial tone
• Connected to parked call
225