Panasonic ICX Section 700 Technical Manual page 180

Chapter 5. Key Telephone Features
6. If a pause is required, press the FL/R key
7. Repeat steps 4-5 (up to 5 more times) for each additional
speed dial number to be chained.
8. Press the HOLD key.
9. Replace the handset or press the ON/OFF key.
To assign a feature code or extension number to a one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. If the System is set for MCO Code level, press the following
keys MEMORY * #. Otherwise, proceed to step 5.
5. Enter the desired feature code or extension number.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
To check a programmed one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the CONF key.
3. Press the one-touch key to be checked.
4. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Considerations
• One-touch keys 1-10 are the same as Personal Speed Dial (PSDs) numbers 80-89.
180
Action
Action
Action
ICX (International), issued March/1999
Section 700 - Operation
Result
• Pause occurs between access code and
telephone number
• R displays
Result
Intercom dial tone
Result
Intercom dial tone
C displays
Programmed data displays
ICX-35-700