Set Personal Speed Dial Numbers - Panasonic ICX Section 700 Technical Manual

Chapter 4. User Maintenance

Set Personal Speed Dial Numbers

Description
For a description of Personal Speed Dial (PSD), see "Personal Speed Dial" on page 183 for a Digital
Key Telephone, "Personal Speed Dial" on page 243 for a Digital Single Line Telephone (DSLT), and
"Personal Speed Dial" on page 288 for a Single Line Telephone (SLT).
Operation
To set PSD numbers:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 01.
3. Press the HOLD key.
4. Press the HOLD key.
5. Press the HOLD key.
6. Dial the extension number.
7. Press the HOLD key.
8. Enter the PSD bin number (80-99).
9. Press the HOLD key.
10. Enter the PSD digits to be dialled.
Note: To clear an entry or existing data, press the FL/R
key.
11. Press the HOLD key to store the entry.
12. To set additional PSD numbers, press the volume up and
down key or press the HOLD key to move to the desired
PSD bin number.
13. Repeat steps 10-12 until all PSD numbers are entered.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
94
Action
ICX (International), March/1999
Section 700 - Operation
Result
81-
User MAINT displays
8101-
PSD Assignment displays
0 :
PSD Number displays
EXT Number displays
Enter PSD # XXX displays (where
XXX = dialled extension number)
YYY ZZ displays (where XXX
= extension number, YYY = assigned
name, and ZZ = PSD bin number)
Next PSD bin number displays
Desired PSD bin number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
ICX-35-700