System Speed Dial - Panasonic ICX Section 700 Technical Manual

Section 700 - Operation
To delete a PSD number:
1. Lift the handset.
2. Enter the Speed Dial Set/Clear code (default = 710 [UK/
HK] or 710# [Taiwan, Malaysia, Indonesia]).
3. Enter the PSD bin number (80-99).
4. Hookflash.
5. Complete the call and replace the handset.
Hardware Requirements
• N/A
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters.
• Single Line Telephone (SLT) can only enter 0, 1-9, *, and #. If a pause, MCO code, intercom
level, Dial Pulse (DP) - Dual Tone Multifrequency (DTMF) code, or SSD code needs to be
programmed, use User Maintenance to program the speed dial.

System Speed Dial

You can store frequently called numbers using the SSD feature. Either 80 or 800 SSD numbers can be
programmed, depending on how the System is configured. In an 80 SSD-number system, the SSD
numbers are stored in bins 00-79. In 800 SSD-number systems, the SSD numbers are stored in bins
000-799.
Operation
To assign SSD numbers:
1. Lift the handset.
2. Enter the Speed Dial Set/Clear code (default = 710 [UK/
HK] or 710# [Taiwan, Malaysia, Indonesia]).
3. Enter the SSD bin number (00-79 or 000-799).
4. Dial the phone number.
5. Hookflash.
6. Replace the handset.
ICX-35-700
Action
Action
ICX (International), issued March/1999
Chapter 7. SLT Features
Result
Intercom dial tone
Result
Intercom dial tone
289