Section 700 - Operation
Hardware Requirements
•
N/A
Considerations
•
N/A
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk
from the MCO trunk group by entering the MCO access code.
Operation
To seize an idle trunk:
1. Lift the handset.
2. Enter the desired trunk access number (9 [UK/HK], 0 [Tai-
wan, Malaysia, Indonesia], or 81-84). (See Table 24 on page
295.)
3. Dial the phone number.
Hardware Requirements
•
N/A
Considerations
•
The System supports up to 576 outside lines in a six-CCU configuration. These lines can be
divided into 99 different trunk groups.
•
Each trunk group can support up to 50 outside lines.
•
Each MCO Tenant Group can have up to 5 MCO trunk access codes. System defaults for MCO
trunk access codes are displayed in the following table.
•
MCO1 can have up to 5 trunk groups assigned by the Advanced Trunk Group feature.
•
MCO1 access code is used for Automatic Route Selection (ARS) access code.
Table 24. MCO Trunk Access Codes
MCO Group
MCO1
MCO2
MCO3
MCO4
MCO5
ICX-35-700
Action
Trunk Access Code
(UK/HK) or
(Taiwan,
9
0
Malaysia, Indonesia)
81
82
83
84
ICX (International), issued March/1999
Chapter 7. SLT Features
Result
Intercom dial tone
Outside dial tone
295