Table of Contents
Advertisement
Section 700 - Operation
Operation
To set Walking TRS (Call Barring) Codes using either a large-display or small-display
phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 08.
3. Press the HOLD key.
4. Press the HOLD key.
5. Dial the extension number.
6. Press the HOLD key.
7. Enter the 4-digit Walking TRS (Call Barring) Code.
8. Press the HOLD key to store the entry.
9. To set additional extension Walking TRS (Call Barring)
Codes, press the volume up and down key or press the
HOLD key to move to the desired Extension.
10. Repeat steps 8-10 until all extension are entered.
11. Press the MEMORY key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
•
N/A
Considerations
•
N/A
ICX-35-700
Action
ICX (International), March/1999
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8108-
Walking TRS Cod displays
Walking ID-Ext displays
Walking ID XXX displays
Next extension number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
111
Advertisement
Table of Contents
