Panasonic ICX Section 700 Technical Manual page 36

Chapter 3. System Features
To switch Day 1/Day 2/Night modes using Feature Access Codes (Version 3.0 and
later):
Switch Mode
Toggle Day 1,
1. Press the ON/OFF key.
Day 2 and Night
Modes
2. Enter 760 (UK/HK) or 760# (Tai-
3. Press the ON/OFF key
Day 2 Mode
1. Press the ON/OFF key.
2. Enter 761 (UK/HK) or 761# (Tai-
3. Press the ON/OFF key
Night 1 Mode
1. Press the ON/OFF key.
2. Enter 762 (UK/HK) or 762# (Tai-
3. Press the ON/OFF key
Night 2 Mode
1. Press the ON/OFF key.
2. Enter 763 (UK/HK) or 763# (Tai-
3. Press the ON/OFF key
Hardware Requirements
• N/A
Considerations
• Day and Night modes can be assigned to FF keys on a phone. You can switch between Day 1,
Day 2, Night, Night 1, and Night 2 modes simply by pressing the appropriate key. The FF key
lights red when the System is in the assigned mode. Alternatively a Day/Night toggle mode key
can be assigned. Pressing the key toggles between modes. When in Day mode, the FF key LED
is not lit. When in Night mode, the LED lights red.
36
Procedure
wan, Malaysia, Indonesia).
wan, Malaysia, Indonesia) for the
Day 2 Feature code.
wan, Malaysia, Indonesia) for the
Night 1 Feature code.
wan, Malaysia, Indonesia) for the
Night 2 Feature code.
ICX (International), issued March/1998
Indication
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
If changing to Day 2 mode, Green LED lights
If changing to Night mode, Red LED lights
If changing to Day 1mode, LED goes off
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Green LED lights
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Red Night LED lights
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Red Night LED lights
Section 700 - Operation
ICX-35-700