Table of Contents
Advertisement
Section 700 - Operation
Verified Account Codes
Verified Account Codes entered by phone users must match a 4-digit code that has been
preprogrammed into an Account Code Table. (It is possible to enter up to 10 digits for a Verified
Account Code; however, only the first 4 digits will be used to verify the code.) These codes can also
be either forced or voluntary. You can program these codes with their own TRS (Call Barring) Class
assignment so that, when entered, they will override the extension's TRS (Call Barring) Class. Thus,
Verified Account Code users can "float" from phone to phone, placing calls that would normally be
restricted on that phone.
Non-Verified Account Codes
Non-Verified Account codes are voluntary codes. (i.e., You do not have to enter an account code
before making a call.)
You can assign Non-Verified Account codes to outgoing calls only. To assign an account code to an
outgoing call, you enter the account code before making the call.
Operation
To enter an account code before making a call:
1. Lift the handset.
2. Enter the Account Code feature code (default = 8#).
3. Enter the Account Code (up to 10 digits).
4. Press the # key.
5. Enter a trunk access code (default = 9 [UK/HK], 0 [Taiwan,
Malaysia, Indonesia], or 81-84).
6. Dial the phone number.
Verified Account Codes
Stations restricted from outside call origination by TRS (Call Barring) can be allowed to make
outgoing calls by entering a Verified Account code that changes the TRS (Call Barring). After a call is
made, the Call Logging record for the call will show the verified account code.
Operation
To make an outside call that requires an account code:
1. Lift the handset.
2. Enter the Verified Account ID code (default = 8#).
3. Enter the Account Code (max. 10 digits).
4. Press the # key.
ICX-35-700
Action
Action
ICX (International), issued March/1999
Chapter 7. SLT Features
Result
Intercom dial tone
Result
Intercom dial tone
261
Advertisement
Table of Contents
