Panasonic ICX Section 700 Technical Manual page 106

Chapter 4. User Maintenance
6. Press the HOLD key.
7. Enter the SSD bin number (00-79 or 000-799).
8. Press the HOLD key.
9. Enter the SSD name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
91.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 92.)
Note: Press the FL/R key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note: Press the FL/R key to clear the entire entry.
12. Press the HOLD key to store the entry.
13. To set additional SSD names, press the volume up or down
key or press the HOLD key to move to the desired SSD.
14. Repeat steps 9-13 until all SSD names are entered.
15. Press the MEMORY key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Considerations
• N/A
106
Action
ICX (International), March/1999
Section 700 - Operation
Result
Enter SSD # displays
A B C D E F XXX displays (where
XXX = SSD bin number)
Next SSD bin number displays
Desired SSD bin number displays
Enter SSD # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
ICX-35-700