Panasonic ICX Section 700 Technical Manual page 178

Chapter 5. Key Telephone Features
3. Enter OHVA feature access code (default = 8 [UK/HK] or
8# [Taiwan, Malaysia, Indonesia]) and announce the call to
be transferred.
4. If transfer is:
• Not accepted, retrieve the call by pressing the associ-
ated flashing MCO key (if an appearing call) or by
pressing the HOLD key (if a non appearing call).
• Accepted, and On-hook Transfer is enabled for your
extension, replace the handset or press the ON/OFF
key.
If On-hook Transfer is not enabled for your extension,
press the PROG key (or RELEASE key if using DSS/
72).
To reply to off-hook voice announcement with a text message:
1. Press the MSG FF key.
2. Enter the Reply Text Message number (1-9, 0). See Table 19
on page 176 for the text message replies.)
To answer a call after it has been announced using the OHVA:
1. Replace the handset.
2. Lift the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Considerations
• The held call is transferred as soon as the extension sending the OHVA hangs up.
• If the transferred call is not answered immediately, it will queue for a set time limit, then return to
the extension sending the OHVA by transfer recall timer.
• You cannot receive a Call Waiting message during an OHVA.
• If a Split key is assigned to the extension that receives an OHVA call, when an OHVA is being
received, the Split key blinks green. If the split key is pressed during an OHVA call to answer,
the Split key lights red. If the split key is pressed again to terminate the OHVA conversation, the
Split key extinguishes.
• If you make an OHVA to an SLT, the SLT user and the other party will hear the announcement.
• Text message reply requires Display Key Telephones. Also, a Text Message Reply key must be
programmed on the replying telephone.
178
Action
Action
Action
ICX (International), issued March/1999
Section 700 - Operation
Result
Result
The text message reply appears on the
camped on telephone display.
Result
Your extension rings
ICX-35-700