Table of Contents
Advertisement
Section 700 - Operation
DDI Busy/Delayed Ringing is also available for hunt group pilot numbers. However, when the
Queuing Timer expires, the call leaves the hunt group and is forwarded to the DDI Busy/Delayed
Ringing destination.
Hardware Requirements
•
N/A
Considerations
•
Call Forwarding takes priority over DDI Busy/Delayed Ringing
•
If the call is part of a hunt group and the Queuing Timer expires, the call is forwarded to the DDI
Busy/Delay Ringing destination. (See "DDI (DID) Day/Night Busy/Delayed Ringing" on page
58.)
Busy Lamp Field Ringing
Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to ring on those
keys.
Hardware Requirements
•
N/A
Considerations
•
ISDN phones may not set BLF ringing.
•
For more information on BLF ringing, see "Line Appearances" on page 169.
Busy Lamp Field Delayed Ringing
Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to delay ring on
those keys.
Hardware Requirements
•
N/A
Considerations
•
ISDN phones may not set BLF ringing.
•
For more information on BLF ringing, see "Line Appearances" on page 169.
Slide Ringing
Similar to Delayed Ringing, Slide Ringing allows an alternate position to answer calls. If a call is not
answered within a slide ringing time period, the call can be set to ring at another phone with that trunk
key.
One possible use for Slide Ringing is in an office with a common secretary. A non-ringing FF key can
be assigned for each trunk used by the group. If a call is not answered within the slide ringing timer,
the call will ring the common secretary.
Hardware Requirements
•
N/A
Considerations
•
N/A
ICX-35-700
ICX (International), issued March/1998
Chapter 3. System Features
59
Advertisement
Table of Contents
