Attaching An Optional Handset - Muratec MFX-1500 Operating Instructions Manual

Getting started
Attach the paper-handling parts
1. Attach the document tray by
inserting it into the appropriate
holes, as shown.
2. Attach the Multipurpose
tray by inserting its two
pegs at a slightly upward
angle into the
appropriate holes, as
shown.
3.
Attach the paper tray
by inserting its two
pegs at a slightly
upward angle into the
appropriate holes,
as shown.
1.12

Attaching an optional handset

You may purchase an optional handset for your fax machine. Here is how to attach
the handset.
Important: Do not connect the handset directly to a telephone wall jack. Instead,
connect it only to your fax, as these instructions describe.
1. Remove the two screw caps and
screws.
2.
Using a Phillips-head
screwdriver, attach the handset
cradle to the rear side of your
machine, using the screws
included with the cradle.
3.
Plug one end of the handset cord
(it's curled) into the
PHONE
on the left of your machine.
4. Plug the other end of the handset
cord into the jack on the handset.
If connected to a phone line, your
fax machine is now "off-hook."
Note: The handset has a small
"flash" button which you
can press while holding
the handset, putting the
fax machine back "on-
hook" until you can hang up the handset properly in step 5.
5. Place the telephone handset onto the handset cradle. The cradle will press
the handset's "flash" button, hanging up the handset.
1 jack