Polling; Regular Polling; Database Polling - Muratec MFX-1500 Operating Instructions Manual

1. Press twice. The
REVIEW COMMANDS
Conf.Report :Off
Program/Enter
2. To change the setting, press
PROGRAM
The "On" setting activates automatic printing of a confirmation report, and the
"Off" setting disable this printing, for only the next transmission.
3. When the setting is as you want it, press
Following the next transmission, your fax machine will return to the setting you specified
previously (in step 5 on previous page).

Polling

Polling allows someone to fax a document to you without the other person having to make
(and pay for) the call. Your machine can perform:
Regular polling — Retrieves a document from the remote fax machine.
Database polling, Muratec-proprietary— (Possible only in communication with certain
memory-equipped Muratec or Murata fax machines.) Retrieves a document stored as a
file in the remote fax machine's memory. Great for getting work assignments, updated
price lists, contest standings and other frequently updated documents.
Continuous polling — Retrieves continuously a document from any remote fax machine
for the designated time. For example, a hospital pharmacy can use this to check on
orders waiting in other faxes in the hospital.
Database polling using - -standard sub-addressing — This allows you to perform
ITU T
database polling in communication with not only other Muratec (or compatible) fax
machines, but also other makers' machines.
How to use the - sub-address, see "F-Code communication" (pages 2.49–2.59).
ITU T

Regular polling

To perform regular polling of a document from any remote fax machine:
1. Make sure that the polling document is actually set in the remote machine.
2. Press
COMMUNICATION OPTIONS
display will show:
Enter Fax Number
_
3. Enter the remote machine's number by either pressing a one-touch key, entering a
speed-dial number or just dialing the number normally through the numeric
keypad.
To perform regular polling now, skip to step 7.
To perform delayed regular polling, proceed to step 4.
will show:
LCD
.
.
ENTER
four times and then press twice. The
ENTER
4. Press
COMMUNICATION OPTIONS
Delayed
Enter Time: 15/17:05
5.
Use the numeric keypad to enter the date and time when your machine should
perform the delayed regular polling.
6. Press .
ENTER
7. Press .
START
When it performs the polling command, your machine will dial the number and, upon
making contact with the other machine, begin receiving the document as if the other
machine had placed the call.

Database polling

To poll a document from a remote fax machine's memory:
1. Make sure that:
• The remote fax machine is a memory-equipped Muratec or Murata fax
machine which has a file stored in its memory, ready for polling.
• You know the one- or two-digit database file number of each file you wish to
poll from the remote machine.
2. Press
COMMUNICATION OPTIONS
show:
Polling
File No. _
3. Enter the database file number for the document you wish to poll. You can enter as
many as 10 file numbers in one operation. To enter more than one (as in this
example), press
COMMUNICATION OPTIONS
do not insert a comma after the last file number.
Polling
File No. 5,26,84
4.
Press . The display will show:
ENTER
Enter Fax Number
_
5. Enter the remote fax machine's number by either pressing a one-touch key,
entering a speed-dial number or just dialing the number normally through the
numeric keypad.
To perform the database polling now, skip to step 9.
To perform delayed database polling, proceed to step 6.
Beyond the basics
, . The display will show:
ENTER
four times and once. The display will
ENTER
between each to insert a comma — but
2.31