Fax Dialing Via Speed-Dial - Muratec MFX-1500 Operating Instructions Manual

Beyond the basics
Note: If you make a mistake or want to erase characters entered in a
previous setting, press
one character in the setting, press
to move it rightward, to that character and press
it. Then re-enter the setting.
15.
Press to save the setting. The display will show the next
ENTER
speed-dial number.
If you do not wish to enter any more speed-dial numbers, press
to finish.
If you do not wish to enter the currently displayed speed-dial number but do
want to enter another speed-dial number, go back to step 3.
To enter this speed-dial number, go back to step 5.
2.14
to erase leftward. Or, to change just
CANCEL
to move the cursor leftward, or
to erase
CANCEL
STOP

Fax dialing via speed-dial

To dial a fax call using a speed-dial number:
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY
2. Insert the document.
3.
Adjust resolution and contrast if necessary.
4.
Toggle between transmission from the feeder or from memory if necessary, by
pressing .
MEMORY TRANSMIT
Note: This toggle affects only a transmission from the
from the is always memory transmission.
FBS
5.
Press / . The display will show:
SPEED DIAL TEL INDEX
Enter Speed-Dial No.
S_
6. Use the numeric keypad to enter the three-digit identifier (such as 018, in this
example) for the speed-dial number you want to dial. The display will show:
Press Start
S018_
7. Press .
START
The machine will handle the call from here. The sequence will vary depending upon whether
you specified transmission from memory or transmission from the feeder.
If you specified memory transmission (
• Your fax scans your document into memory first, then dials the other fax.
• The display shows the Location
and the document's width and
ID
resolution settings:
Shipping & Receiving
A4 Normal
Note: If the speed-dial number doesn't have a Location
• When the other machine answers, your fax will transmit the document directory
from memory. (To review memory transmission, see page 1.23.)
to change to Fax mode.
/
FAX
. Transmission
ADF
or ):
ADF FBS
, the number appears.
ID