Making Copies; Guidelines; How To Make Copies; Changing The Reduction Ratio - Muratec F-320 Operating Instructions Manual

Making copies

Guidelines

Before you begin making copies, please read the following guidelines.
Acceptable document sizes
You can set up to 80 sheets of letter-sized document in the
The acceptable document sizes for coping are same as for faxing. Refer to page 2.1.
Scanning width
The scanning width when you make copies is 8.5 inches, no matter the document
size.
Note: If the document size is Letter, for example, the scanning area will be as
follows:
Feed direction
Printing margin
The machine does not print approx. 0.12 inches on each side of the paper.

How to make copies

Your fax machine also doubles as a convenient copier.
at one time.
ADF

Changing the reduction ratio

Your fax machine is capable of reduction when copying. You can choose from
78% (Legal
Note: If the "Auto" is set, the machine automatically reduce the original document
To change the reduction ratio:
1
Press to change to Copy mode.
COPY
When the machine is in the Copy mode, the
# Of Pgs. To Copy 01
Fine
2
Place your original document in
3
As needed, set the following:
• Adjust document mode and contrast
• Enter the number of copies
4
Press to start the copying.
START
Note: When you make multiple copies, your machine always sort copies.
Note: To stop the copying, press
Letter), 100% and Auto.
size to fit on the paper size, which makes the margin as little as possible.
1
Press , 2, 3, 2, .
MENU ENTER
Prt Reduc. Rate:100%
$ $ # #
/ /Enter
2
Press or until your desired ratio appears.
3
Press to save the setting.
ENTER
4
Press to return to the standby mode.
STOP
Basic operation
shows:
LCD
face up just as you would sending a fax.
ADF
.
STOP
2.11