Check Message" Printouts - Muratec MFX-1500 Operating Instructions Manual

Just in case . . .

"Check Message" printouts

When a fax call goes awry and your machine detects an error, it produces an error
printout headed by the words "Check Message". This printout lists the following
information about the transmission:
The resulting error code
A communications error message (see previous page)
The phone number (or, perhaps,
TTI
machine had attempted to communicate
What error messages can mean
The error messages on Check Message printouts can mean a variety of things.
Here's a brief summary:
Error Message
Check condition of remote fax
Repeat transmission
Line is busy
Check received documents
Memory full
Dialing number is not set
Stopped
3.12
) of the fax machine with which your
Possible Meanings
• Remote machine malfunctioned
• No "handshake" signals from remote fax
• Wrong phone number reached
• Poor phone line conditions
• No "handshake" signals from remote fax
• Document misfeed or miscount
• Unable to reach remote machine after
attempting specified number of redial tries
• Remote machine's line was busy
• Remote machine's line didn't answer
• Receive confirmation signal not received
from remote fax
• Poor line conditions caused a poor image
• Remote fax's memory capacity exceeded
• Stored phone number failed to dial properly
• Someone pressed
at the remote fax in
STOP
the middle of the "handshake"