Configuring Settings During An External Call - Gigaset DX800 A User Manual

Making calls using network services
Activating/deactivating the
keypad function for the next call
(ISDN)
Prerequisite: Your telephone is connected
to the ISDN network. You have selected an
MSN as the send connection.
The keypad function allows you to control
certain features by entering sequences of
characters and digits. For keypad control see
page 144.
You can temporarily activate keypad control
for the next call via ISDN.
¢
v Ç Select Services
¢
Keypad Control
Select and press
~
Enter phone number.
§Dial§
Press the display key or pick up
the receiver. The number is
dialled.
Configuring settings during
an external call
Please note
For VoIP telephony, the services described
below are only available if parallel IP con-
nections are permitted.
Initiating ringback when busy/no
answer (analogue/ISDN
connection)
Please note
u
You can use this function only for calls
via the analogue fixed line or the ISDN
network.
u
A ringback display key/menu func-
tion for activating ringback only
appears on the base if the exchange
supports this feature.
If the person you are calling does not answer
or their line is busy, you can initiate ringback.
62
¢
Next Call
§OK§
.
Ringback when busy: The ringback will take
place as soon as the party in question termi-
nates the current call.
Ringback when no answer: The ringback will
take place as soon as the party in question
has made a call.
Initiate ringback:
Prerequisite: You have dialled a number and
set your fixed line connection or an MSN for
your ISDN connection as the send connec-
tion.
§Ringback§
Press the display key.
If ringback has been successfully activated,
the message Ringback activated is dis-
played. The call is ended. The base returns to
idle status.
If ringback has not been successfully acti-
vated in the exchange, Ringback not possi-
ble! appears in the display.
& / T
Replace the receiver or press the
red end key.
Initiating ringback during an external
consultation call:
You wish to initiate an external consultation
call during an external call. The line is busy or
there is no answer.
¢
§Options§
Ringback
Select and press
§End§
Press the display key to return to
the party on hold.
Please note
u
You can only activate one ringback at
a time. If you activate a second ring-
back, the first one is automatically
deleted.
u
The ringback is initiated on the previ-
ously used send connection.
u
The ringback can only be received on
the device that activated the ring-
back.
§OK§
.