Pan/Tilt Settings; Using The Pan/Tilt Setup Menu - Panasonic WV-CS950 Operating Instructions Manual

WV-CS950_US 05.4.27 8:54 PM ページ27

PAN/TILT SETTINGS

■ Using the Pan/Tilt Setup Menu

Display the pan/tilt setup menu from the setup menu to
configure pan and tilt settings.
First, display the pan/tilt setup menu.
Use a shortcut (page 45) to switch between displaying
or not displaying the pan, tilt, and zoom positions
(during pan, tilt and zoom operation) on the monitor
screen.
* The tilt position is displayed ranging from –5˚ to 90˚
to –5˚.
1. Display the setup menu (page 21), move the cursor
to PAN/TILT O, and then press the CAM (SET)
button.
This will display the pan/tilt setup menu.
**PAN/TILT SETUP**1/2
PRESET 1
MAP
HOME POSITION OFF
SELF RETURN
AUTO MODE
AUTOPAN KEY
PATROL
PRIVACY ZONE
IMAGE HOLD
DIGITAL FLIP
PROPO.P/T
**PAN/TILT SETUP**2/2
AREA TITLE
TILT ANGLE
CLEANING
RET TOP
* The following sections numbered q to !4 explain
how to use each of the pan/tilt setup menu items.
(1) Position Number Selection (PRESET)
Positions can be assigned numbers, each of which can
be configured with
monitoring conditions.
You can use either the PRESET item or the MAP item on
the pan/tilt setup menu to select a position number.
Position numbers 1 through 4 are used for alarm
functions (pages 37 and 38) and operating them.
1. Move the cursor to the 1 next to the PRESET item,
and then tilt the joystick left or right to change the
position number to the one you want.
2. Press the CAM (SET) button.
This registers the position number setting and
displays the preset setting menu. (this page)
360°/ 90°/X001
Pan position Zoom ratio
Tilt position*
q
w
e
r
OFF
t
OFF
y
AUTO PAN
u
i
OFF
o
OFF
!0
ON
!1
ON
!2
ON(USER)
!3
0°
!4
OFF
a monitoring position
(2) Position Number Selection (MAP)
You could use the MAP item on the pan/tilt setup menu
instead of the PRESET item to select a position
number.
1. Move the cursor to MAP O, and then press the
CAM (SET) button.
**PRESET POSITION**
1*
5
9
13
17
21
25
29
ID:DOOR
033-064
RET TOP
2. Move the cursor to the number you want to select,
and then press the CAM (SET) button.
This registers the position number setting and
displays the preset setting menu. (this page)
To select a position number in the range of 033 to
064, move the cursor to 33-64 in the lower left corner
of the menu, and then press the CAM (SET) button.
Preset numbers set subsequently are the same.
**PRESET POSITION**
33
37
41
45
49
53
57
61
ID:
065-096
RET TOP
Notes:
• An asterisk (*) to the right of a position number
indicates that it already has a preset position
assigned to it.
The home position number is indicated by the
letter H next to the asterisk.
• When the cursor is located at a position number
that has a position ID, the position ID text
appears next to ID: on the menu screen.
● Position Setting (POSITION SET)
The position setting can be used to specify the camera
position (pan and tilt), the lens zoom setting, and the
focus setting.
1. Move the cursor to POSITION SET O and press the
and
CAM (SET) button to display the position setting menu.
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
RET TOP DEL
2. Move the cursor to →PUSH SET to the right of
PAN/TILT, and then press the CAM (SET) button to
display the PAN/TILT setting menu.
-27-
2 3 4
6 7 8
10 11 12
14 15 16
18 19 20
22 23 24
26 27 28
30 31 32
225-256
34 35 36
38 39 40
42 43 44
46 47 48
50 51 52
54 55 56
58 59 60
62 63 64
001-032
PRESET NO. 1*
ON
ALC
MANUAL L
10S
OFF
••••••••I
L H