Features; Super Dynamic 3 (Super-D 3); New Dsp For High Sensitivity; Auto Nighttime Switching To Black And White Mode - Panasonic WV-CS950 Operating Instructions Manual

WV-CS950_US 05.4.27 8:54 PM ページ5

FEATURES

This Colour CCTV Camera is a video surveillance
device that incorporates a 1/4-type {1/4"} CCD, a 30x
zoom lens, preset and pan and tilt capabilities in a
dome configuration. It also has the following features.
■ Super Dynamic 3 3 (SUPER-D 3 3 )
SUPER-D 3 makes it possible to capture clear images
of subjects whose illumination is extremely different
(page 22).

■ New DSP for High Sensitivity

A new noise reduction system lowers minimum illumi-
nance to 0.5 lux in the colour mode and 0.04 lux in the
black and white mode.
■ Auto Night time Switching to Black
and White Mode
The camera can be configured to switch to the black
and white mode automatically under low light condi-
tions for clear images, even at night.

■ Digital Flip

Normally, a camera needs to stop when it points
straight down during a tilt operation. With digital flip,
however, the camera is able to tilt from 0° to 180° in a
single motion. This makes it possible to track subjects
passing directly under the camera more smoothly.
Digital Flip Operation
Tilting The picture is flipped
downwards when the camera is
pointing straight down
(at around 135°).
· · · Digital flip is performed only when the system controller joystick is held downwards.
ACCESSORIES
Operating Instructions (this manual) . . . . . . . . . .1 pc.
OPTIONAL ACCESSORIES
Dome Cover(approx.50 % transparency,smoked type) . . . . . . .WV-CS3SE
Ceiling Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WV-Q105E/WV-Q116E/WV-Q117E
Wall Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WV-Q118E
■

Privacy Zone Function

The privacy zone function makes it possible to mask
specific areas of the scene from view.

■ Patrol Function

The patrol function remembers manual camera move-
ment routines for automatic playback when they are
needed. For example, you can teach the camera the
movements of the people you want to monitor, by
replaying the stored parameters complicated move-
ments are done automatically.

■ Camera Position Memory

The system can be configured with up to 256 camera
positions. A particular camera position can be selected
and viewed by entering the applicable preset number
on the system controller 10-key pad.

■ Motion Detection

The system can be configured so any motion on the
monitor screen during surveillance causes output of an
alarm signal.
This function can be used to structure a system with a
VTR that records images of night time intruders.
Tilting upwards.
The following items are for installation.
Decorative Cover . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Dust Protection Sheet . . . . . . . . . . . . . . . . . . . . . .1 pc.
8P Alarm Cable . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
4P Alarm Cable . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Connector for 24 V AC (only for WV-CS954E) . . .1 pc.
-5-