Ethernet On Board Submenu - Fujitsu Primergy RX100 S2 User Manual

■ Ethernet on Board Submenu

Configures the LAN controller on the baseboard.
Item
Device
Option ROM Scan
Latency Timer
■ PCI IRQ Configuration Submenu
Sets PCI IRQs for the PCI slots.
Item
PCI IRQ Line 0/VGA
PCI IRQ Line 1/
ETHERNET B
■ PCI SLOTS Configuration Submenu
Configures the PCI slots.
Item
Option ROM Scan
Bus Master
Latency Timer
table: Items on the Ethernet on Board Submenu
Setting
Enabled (Fixed parameter)
• Disabled (at the time of
purchase)
• Enabled
0040h (Fixed parameter)
table: Items on the PCI IRQ Configuration Submenu
Setting
Auto (Fixed parameter)
table: Items on the PCI SLOTS Configuration Submenu
Setting
• Disabled (when PCI Slot 2
is purchased)
• Enabled (fixed for PCI Slot
1)
Enabled (Fixed parameter)
0040h (Fixed parameter)
PRIMERGY RX100 S2 User's Guide
Description
Sets whether or not to use Ethernet controller A on
the baseboard.
Sets whether or not to initialize the extended ROM.
This value can be selected when [Device] is set to
[Enabled].
Sets the minimum guarantee time in the PCI bus
clock unit for the PCI bus master method.
This value can be selected when [Device] is set to
[Enabled].
Description
Sets a PCI IRQ for the VGA controller on the
baseboard.
Sets a PCI IRQ for the LAN controller on the
baseboard.
Description
Sets whether or not to initialize the extended
ROM. For notes on settings, refer to "7.4.2
Installable Expansion Cards and Notes"
( pg.171).
Sets whether or not the PCI slot is operated as the
bus master.
Sets the minimum guarantee time in the PCI bus
clock unit for the PCI bus master method.
8
203