Advanced Menu - Fujitsu Primergy RX100 S2 User Manual

8.2.5 Advanced Menu

Configures peripheral and PCI devices.
Main Advanced
Setup Warning
Setting items on this menu to incorrect
values may cause your system to malfunction.
Peripheral Configuration
PCI Configuration
Advanced System Configuration
Power On/Off
Reset Configuration Data:
Secured Setup Configurations:
Multiprocessor Specification:
Windows 2003 EMS Function:
Large Disk Access Mode:
S-ATA Interface:
S-ATA Mode:
LSI SATA RAID:
F1 Info Select Item
Exit
Esc Select Menu
Item
Peripheral Configuration
PCI Configuration
Advanced System
Configuration
Power On/Off
Reset Configuration Data
Secured Setup
Configurations
Multiprocessor
Specification
Windows 2003 EMS
Function
Large Disk Access Mode
PhoenixBIOS Setup Utility
Security Server Exit
[No]
[No]
[1.4]
[Enabled]
[DOS]
[Enabled]
[Legacy IDE]
[Disabled]
-/+ Change Values
Enter Select Sub-Menu
table: Items on the Advanced Menu
Setting
[Enter]
[Enter]
[Enter]
[Enter]
• Yes
• No (at the time of
purchase)
No (Fixed parameter)
1.4 (Fixed parameter)
• Disabled
• Enabled (at the time of
purchase)
DOS (Fixed parameter)
PRIMERGY RX100 S2 User's Guide
Item Specific Help
Setup Defaults
F9
F10 Save and Exit
Description
Configures the serial port, parallel port, etc.
"8.2.6 Peripheral Configuration Submenu"
(pg.200)
Configures the PCI device.
"8.2.7 PCI Configuration Submenu" (pg.202)
Configures additional settings.
"8.2.8 Advanced System Configuration
Submenu" (pg.204)
Configures power On/Off settings.
"8.2.9 Power On/Off Submenu" (pg.206)
Sets the initialization of the Extended System
Configuration Data (ESCD) where the system
resources are recorded.
This setting is changed to [No] whenever the
system is restarted.
Sets whether or not to reject setting changes made
by the Plug&Play OS.
Sets the version of the multiprocessor to use.
Sets whether to enable or disable the EMS
functions.
Sets the hard disk access type supporting large-
capacity hard disk drives.
8
199