Installing High Reliability Tools - Fujitsu Primergy RX100 S2 User Manual

1.2.3 Installing High Reliability Tools

You can install all high reliability tools provided with PRIMERGY by specifying them in "Application
Wizard" when the OS is installed with ServerStart.
The following high reliability tools are installed.
High Reliability Tools
RAID Management Tool
ServerView
DSNAP
®
Intel PROSet
A: Installed in any case
S: Installed if selected
*1: Not installed if no RAID controller has been installed.
Linux does not support batch installation with ServerStart.
When the high reliability tools are installed at once with ServerStart:
ServerView must be configured after installation. Refer to "Chapter 6 High Reliability Tools" ( pg.155).
In case where the operating system has been installed with ServerStart, if a high reliability tool is not
installed or the OS has been manually installed, use a standard installer for each tool. For the installation
procedure with the standard installers, refer to "Chapter 6 High Reliability Tools" ( pg.155).
table: High reliability tool installation
Batch installation with ServerStart
PRIMERGY RX100 S2 User's Guide
*1
A
S
S
A
1
21