Fujitsu Primergy RX100 S2 User Manual page 140

Chapter 5 Operations after OS Installation
6
If the following have been set in the BIOS Setup Utility, restart the system and
repeat Steps 1 to 4.
The following settings when [Advanced] menu → [PCI Configuration] submenu → [Ethernet on
Board] submenu → [PCI Device, Embedded Ethernet A] and [PCI Device, Embedded Ethernet
B] are selected
Device
Option ROM Scan
When checking the settings of the BIOS Setup Utility, refer to "8.2 BIOS Setup Utility"
( pg.191) and "
7
The BIOS information will be enabled after the next system restart. Restart the
server.
Perform Step 1 to display the DOS prompt window. The restoration procedure has been
completed. The server can now be turned off safely.
140
table: BIOS Setup Utility Setting
Item name Setting
Enabled
Enabled
■
Ethernet on Board Submenu" ( pg.203).