Fujitsu Primergy RX100 S2 User Manual page 243

2
Start Server Management Tools.
3
Select [User Management] and press the [Enter] key.
The [USER MANAGEMENT] window appears.
FUJITSU
SIEMENS
COMPUTERS
ID --- USER NAME ---
1
2 Operator
3 Administrator
4 OEM
5 Remote
6 admin
<ENTER> Configure User
4
Set the password in [Administrator] for ID 3.
1. Select an [ID] and press the [Enter] key.
2. Specify the [User Name] and [Password] and set the [Operation] to [1] (Enable
User).
3. Press the [F1] key to save the current settings.
5
Press the [Esc] key to return to the Server Management Tools [menu] window.
6
Select [Channel Configuration].
7
Select [#2 802.3_LAN] and press the [Enter] key.
The [CHANNEL CONFIGURATION] window appears.
8
Press the [F1] key and set the followings in the [LAN CONFIGURATION]
window.
table: LAN Setup in Channel Configuration Window
Item
BMC-NIC
Subnet Mask
Default Gateway
9
Press the [F1] key to save the current settings.
USER MANAGEMENT
<F2> Configure User Access <ESC> Exit
Enter the IP address and MAC address of BMC-NIC.
The IP address must be the one assigned to LAN port 1
by the OS on the server.
Enter the subnet mask of the network.
Enter the IP address and MAC address of the default
gateway on the network.
PRIMERGY RX100 S2 User's Guide
Setting
9
243