Parallel Ata Submenu - Fujitsu Primergy RX100 S2 User Manual

8.2.3 Parallel ATA Submenu

Appears when [Parallel ATA] is selected from the [Main] menu.
Sets the type and operating mode for the connected internal hard disk unit.
Main
Parallel ATA
Type:
Transfers mode:
LBA Translation:
PIO Mode:
32 Bit I/O:
Ultra DMA Mode
F1 Info Select Item
Exit
Esc Select Menu
Item
Type
CHS Format, Cylinders,
Heads, Sectors, Maximum
Capacity
LBA Format,
Total Sectors,
Maximum Capacity
Transfers Mode
LBA Translation
PhoenixBIOS Setup Utility
[SR243T]
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
[Disabled]
-/+ Change Values
Enter Select Sub-Menu
table: Items on the Parallel ATA Submenu
Setting
Auto (Fixed parameter)
-
-
- (Fixed parameter)
- (Fixed parameter)
PRIMERGY RX100 S2 User's Guide
Item Specific Help
Setup Defaults
F9
F10 Save and Exit
Description
Sets the type of the IDE device.
Note:
If the value is set to [None], the next menu is
not displayed.
Displays or sets the number of cylinders, number of
heads, number of sectors, and the maximum
capacity detected by the server.
Those items are displayed if [Type] is set to [User].
Displays or sets the total number of sectors and the
maximum capacity of the disk detected by the
server.
Those items are displayed if [Type] is set to [User].
When [Type] is set to [Auto], displays the number
of sectors to transfer at once detected by the server.
Sets the number of sectors to transfer at once if
[Type] is set to [CD-ROM], [Other ATAPI],
[ATAPI Removable], [IDE Removable] or [User].
The disk access speed increases if a larger number
of sectors is specified to transfer simultaneously.
Sets whether to enable or disable the Logical Block
Addressing (LBA: access based on logical serial
numbers).
When [Type] is set to [Auto], the current settings
appear.
It can be set when [Type] is set to [CD-ROM],
[Other ATAPI], [ATAPI Removable], [IDE
Removable] or [User].
8
195