Viewing The System Event Log - Fujitsu Primergy RX100 S2 User Manual

Chapter 9 Operation and Maintenance
1
Insert the "Server Management Tools" disk supplied with this server into the
floppy disk drive.
The system will boot from the floppy disk and the DOS prompt is displayed.
2
Enter the following command and press the [Enter] key.
A:\SMT>IPMIVIEW.EXE
The menu window of Server Management Tools appears.
MS-DOS 6.2 Startup Menu
_______________________
1.Server Management Tool
2.Basic(BIOS Environment Support Tools)
3.Basic(RAIDUTIL)
4.Basic(Japanese Environment)
5.HDD firmware update
6.System Setup Utility(SSU) for N800
7.Server Management Tools for BX300
Only the following functions are supported by Server Management Tools:
• System Event Log (SEL)
• User Management
• LAN Configuration
■ Exiting Server Management Tools
1
Press the [Esc] key once in the menu window of Server Management Tools.
The power can be turned off when the DOS prompt is displayed.

9.3.2 Viewing the System Event Log

Viewing the system event log is performed from System Event Log (SEL) of Server Management Tools.
1
Start Server Management Tools.
The menu window of Server Management Tools appears.
240