How To Install An Expansion Card - Fujitsu Primergy RX100 S2 User Manual

Chapter 7 Installing Internal Options

7.4.3 How to Install an Expansion Card

1
Turn off the power and remove the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.164)
2
Touch a metal part of the server to discharge static electricity.
3
Unplug the cable from the SCSI or RAID card installed in Slot 1.
Unplug the SCSI cable and the hard disk access LED cable.
Hard disk access LED cable
4
Loosen the screws on the rear side of the server, and remove the card locking
frame.
174
SCSI cable
Card locking frame
Screw
Screw