Parallel Interface; Installing A Parallel Interface - Fujitsu PRIMERGY RX300 S2 Options Manual

12

Parallel interface

V
CAUTION!
Observe the safety instructions in the
12.1

Installing a parallel interface

Ê Open the server as described in the
I
For standard configuration the parallel interface is to install into a low-
profile slot cover. If the optional riser board is used, a standard slot cover
is necessary.
Parallel interface in standard configuration
Figure 67: external parallel interface with low-profile slot cover
RX300 S2
chapter „Safety notes" on page
chapter „Preparation" on page
Options Guide
15.
21.
87