Processing Images With Digital Filters - Ricoh Pentax K-1 Operating Manual

Processing Images with Digital Filters

1
Display the image to edit in single image display.
2
Select b in the playback mode palette.
The screen to select a filter appears.
3
Select a filter.
Use Q to select a different
image.
Base Parameter Adj
Extract Color
Replace Color
Toy Camera
Retro
High Contrast
Shading
Invert Color
Unicolor Bold
Bold Monochrome
Tone Expansion
Proceed to Step 7 if you do not need to change
the parameters.
4
Press G.
The parameter setting screen appears.
100-0001 100-0001
Base Parameter Adj Base Parameter Adj
Parameter Adj. Parameter Adj.
Stop Stop OK OK
Sketch
Water Color
Pastel
Posterization
Miniature
Soft
Starburst
Fish-eye
Slim
Monochrome
5
Set the parameters.
Available operations
Selects a parameter.
AB
Adjusts the value.
CD
6
Press E.
The screen of Step 3 reappears.
7
Press E.
The save confirmation screen appears.
8
Select [Apply additional filter(s)], [Save to SD1],
or [Save to SD2], and press E.
Select [Apply additional filter(s)] when you want to apply
additional filters to the same image. The screen of Step 3
reappears.
u Caution
• Only JPEG and RAW images captured with this camera
can be edited with the digital filters.
• RAW images captured using HDR Capture or Pixel Shift
Resolution cannot be processed with Digital Filter.
t Memo
• Up to 20 filters, including the digital filter used during shooting
(p.67), can be applied to the same image.
Brightness Brightness
Cancel Cancel OK OK
4
83