Shooting Movies And Still Images; Shooting Still Images And Underwater Still Images; Shooting Still Images With Burst Shooting - Ricoh WG-M2 Operating Manual

Shooting movies and still images

Select the shooting mode according to the subject or scene and
shoot movies or still images.
t Memo
• Pressing the button in any shooting mode brings you
back to the shooting screen if the camera enters [Power
3
Saving] mode (p.42) and the LCD screen is turned off.
Shooting still images and underwater still
images
Attach the supplied underwater lens protector (O-LP1632)
when shooting underwater still images. (p.11)
1
Set the [Rec. Mode] to
either [Still Image] or
[Underwater Still
Image]. (p.29)
The shooting screen
appears and either g or G
is displayed.
2
Press the button to shoot still images.
18
526 526 526
When shooting still images

Shooting still images with burst shooting

Continuous still images are shot while the shutter button is
pressed (ten images are shot consecutively).
1
Set the [Rec. Mode] to
[Burst Shooting].
(p.29)
The shooting screen
appears and F is
displayed.
2
Press the button to start burst shooting.
Burst shooting stops after ten consecutive images are shot.
526 526 526