Using The Battery And Charger - Ricoh Pentax Q-S1 Start Manual

Using the Battery and Charger

Charging the Battery
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
Indicator lamp
Battery charger
3
Face the A mark on
the battery up, and insert
it into the battery charger.
The indicator lamp is lit while
charging and turns off when
the battery is fully charged.
(Approximate maximum
charging time: 115 minutes)
Inserting/Removing the Battery
1
Slide the battery cover
in the direction of 1.
2
Insert the battery until it locks
into place with the A mark
facing toward the lens.
To remove the battery,
push the battery lock lever
in the direction of 3.
3
Close the battery cover, and
AC plug cord
slide it in the direction of 5.
1
2
3
5
4
17