Table of Contents
Advertisement
To remove the lens
Attach the lens cap, and then turn
the lens counterclockwise while
pressing the lens unlock button
(4).
u Caution
• When attaching or removing the lens, choose an environment
that is relatively free of dirt and dust.
• Keep the body mount cover attached to the camera when a
lens is not attached.
• Be sure to attach the lens mount cover and lens cap to the
lens after removing it from the camera.
• Do not insert your fingers inside the lens mount of the camera
or touch the mirror.
• The camera body and lens mount incorporate lens
information contacts. Dirt, dust, or corrosion may damage the
electrical system. Please contact your nearest service center
for professional cleaning.
• When a retractable lens is attached and is not extended, you
cannot take pictures or use some functions. If the lens is
retracted during shooting, the camera stops working. Refer to
"How to Use a Retractable Lens" (p.46) for details.
• We assume no responsibility nor liability for accidents,
damages, and malfunctions resulting from the use of lenses
made by other manufacturers.
t Memo
• Refer to "Functions Available with Various Lenses" (p.113) for
details on the functions of each lens.
Using the Battery and Charger
Use the battery D-LI109 and battery charger D-BC186
exclusively developed for this camera.
Note: AC plug cord
4
UL Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated
125 V, 7 A, minimum 6 ft. (1.8 m)
Charging the Battery
1
Insert the power plug to
the USB power adapter
until it clicks.
2
Connect the USB cable to
the USB power adapter.
3
Plug the USB power
adapter into the power
outlet.
2
3
2
37
Advertisement
Table of Contents
