AT&T TL86103 User Manual page 78

Telephone operation
Redial
-OR-
You can also insert the area code to the redial number before dialing.
Enter the area code in idle mode, and then press REDIAL/
1.
2. Press CID, DIR, or REDIAL/
number displays, and then press
front of the selected redial number.
3. Press LINE 1/
line 2, or press
Using the telephone base:
Press REDIAL/
1.
2. Press CID, DIR, /RECORD, or /DELETE to browse until the desired
number displays. The telephone base beeps twice at the end of the list.
3. Press LINE 1, LINE 2, or SPEAKER
Cell A or CELL B
-OR-
1. Press LINE 1, LINE 2, or SPEAKER
Cell A or CELL B
2. Press CID, DIR, /RECORD, /DELETE, or REDIAL/
browse until the desired number displays. The handset beeps twice at the
end of the list.
• If you are using the cell line, press
DIAL
3. Press
-OR-
You can also insert the area code to the redial number before dialing.
1. Enter the area code in idle mode, and then press REDIAL/
2. Press CID, DIR, /RECORD, or /DELETE, or REDIAL/
to browse until the desired number displays, and then press
area code will be added in front of the selected redial number.
Press LINE 1, LINE 2, or SPEAKER
3.
Cell A or CELL B
, LINE 2/
FLASH
A CELL or
in idle mode.
PAUSE
to dial using the cell line.
to use the cell line, and then press REDIAL/
to dial the number displayed.
to dial using the cell line.
repeatedly to browse until the desired
PAUSE
INSERT
. The area code will be added in
, or /SPEAKER to dial using line 1 or
FLASH
B CELL to dial using the cell line.
to dial using line 1 or line 2, or press
to use line 1 or line 2, or press
INSERT
to dial using line 1 or line 2, or press
72
PAUSE
repeatedly to
PAUSE
to select the desired number.
PAUSE
PAUSE
INSERT
in idle mode.
.
PAUSE
in idle mode.
repeatedly
. The