AT&T TL86103 User Manual page 52

Telephone settings
Cordless handset and telephone base
Using the telephone base:
MENU
1. Press
2. Press CID, DIR, /RECORD, or /DELETE to
highlight Directory, and then press
3. Press OPTION
Press CID, DIR, /RECORD, or /DELETE to
4.
highlight Home area code, and then press
The screen briefly shows Only for 7 digits dialing from Caller ID log.
5. Use the dialing keys to enter a three-digit home area code.
• Press /DELETE or
Press and hold /DELETE to erase all digits.
•
• Press CID or /REPEAT to move the cursor to the left. Press DIR
or /SKIP to move the cursor to the right.
6. Press SAVE
Area code will not be shown in Caller ID log briefly before returning to
the previous menu.
NOTE:
• If in the future, your telephone service provider requires you to dial ten digits to make a local
call (area code plus telephone number), you need to delete your home area code. With the
home area code displayed, press and hold
/DELETE on the telephone base until the digits are deleted, and then press on the telephone base until the digits are deleted, and then press
area code is now restored to its default setting of _ _ _ (empty).
and telephone base settings
in idle mode to enter the main menu.
to choose Home.
BACKSP
to confirm. You hear a confirmation tone and the screen shows
SELECT
.
SELECT
to erase a digit.
/DELETE on the handset or press and hold
MUTE
46
HOME AREA CODE
BACKSP
.
SAVE
- - -
SAVE
. The home