Make, Answer, Or End A Cell Call - AT&T TL86103 User Manual

Telephone operation
Telephone operation

Make, answer, or end a cell call

The TL86103 can be used to make or answer calls on the cell lines. You can
connect a maximum of 2 Bluetooth enabled cell devices to the telephone base.
Both cell devices can be used on two cell lines at the same time.
Using a cordless handset:
To make a cell call:
A CELL or
• Press
Press DIAL
To predial a cell call:
• Enter the telephone number, and then press
To answer a cell call:
• Press /SPEAKER,
To end a cell call:
Press OFF/
•
CANCEL
Using the telephone base:
To make a cell call:
Press CELL A
•
DIAL
Press
To answer a cell call:
• Press SPEAKER
-OR-
• Lift the corded handset.
To end a cell call:
Press the corresponding cell button, CELL A
•
-OR-
• Press SPEAKER
NOTES:
• You can also use your cell phone to answer the call. If you answer with your cell phone, it
disconnects from the telephone base.
• If you do not want to answer the call, press
• When you try to make a cell call but your cell phone is not connected to the base, the
telephone base displays Cellular phone not connected. Please connect to proceed. Press
CONNECT on the telephone base to connect your cell phone to the telephone system. Refer to
Bluetooth connection from idle mode on page 27 and Connect/disconnect an active device
on page 28.
You can also make or answer a cell call using AT&T Softphone Call Manager. Please refer to
•
the Installation and Operation Guide in the CD-ROM which comes with the package.
B CELL, and then enter the telephone number.
, /SPEAKER,
A CELL, or
, or place the cordless handset into the charger.
or CELL B
or SPEAKER
, CELL A
or return the corded handset to the telephone base.
A CELL, or
B CELL.
, and then enter the telephone number.
.
, or CELL B
REJECT .
55
B CELL to dial.
A CELL or
.
or CELL B
B CELL.
.