AT&T TL86103 User Manual page 30

Bluetooth
Bluetooth setup
7. Once your cell phone finds your AT&T phone
(AT&T DECT 6.0), press the appropriate key on your cell
phone to continue the pairing process.
• Your cell phone may require a passcode. In this case,
the telephone base displays Check cellular. ENTER
PASSCODE. Enter the cell phone passcode (typically
0000) into the telephone base and press
• Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process, if required. The telephone base displays
Adding Cell Phone A.
8. When a device is successfully connected, the telephone base displays
Cell Phone A is added and connected to base. You hear a confirmation
tone. The corresponding status icon (A
corresponding device light on the telephone base (CELL A
CELL B/HEADSET
If you have trouble pairing your cell phone, it may not be compatible with
your TL86103. Check the Bluetooth compatibility list at
www.telephones.att.com/bluetooth
NOTES:
• The pairing process may take up to one minute. If the pairing process fails, turn off the
Bluetooth feature on your cell phone and on the TL86103 by pressing Cell A
Repeat the steps, as mentioned above, to pair and connect again. In some cases, it may take
you a few attempts to complete the pair process.
• The steps for the pairing process may vary for different cell phones. If this happens, follow the
prompts on your cell phone and your TL86103 to complete the pairing process.
• Refer to the user's manual of your cell phone on how to search for or add a new Bluetooth
device.
) turns on.
24
SET
.
B) displays. The
or
CELL A and/or
.
Adding
Cell Phone A
Cell Phone A
is added
and connected to
base.
or CELL B .