AT&T TL86103 User Manual page 115

Answering system
Answering system settings
To delete your outgoing announcement:
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU to enter the main menu.
SELECT
2. Press
3. Press CID, DIR, /RECORD, or /DELETE to
highlight Mailbox 1 or Mailbox 2, and then
SELECT
press
4. Press SELECT
5. Press CID, DIR, /RECORD, or /DELETE to highlight Play annc, and
then press SELECT
While the announcement is playing, press /DELETE to delete the
6.
announcement. The screen shows Annc. Reset.
To reset your outgoing announcement:
1. When the telephone base is in idle mode, press
MENU to enter the main menu.
SELECT
2. Press
3. Press CID, DIR, /RECORD, or /DELETE to
highlight Mailbox 1 or Mailbox 2, and then
SELECT
press
4. Press SELECT
Press CID, DIR, /RECORD, or /DELETE to
5.
highlight Reset annc, and then press
The screen shows Reset to default annc?.
6. Press YES to confirm. The screen shows Announcement reset to default.
When your announcement is deleted, the system answers calls with the
default announcement described on page 107. You cannot delete the default
announcement.
to select Answering system.
.
again to select Announcement.
.
to select Answering system.
.
again to select Announcement.
SELECT .
109
Annc. Reset
Reset to
default annc?
YES
NO
Announcement
reset to default