AT&T TL86103 User Manual page 110

Caller ID
Caller ID operation
Using the telephone base:
1. Select a desired entry in the caller ID log (see Review the caller ID log on
page 101).
2. When the desired entry appears, press # (pound key) repeatedly to show
different dialing options.
3. When the number is in correct format, press
displays EDIT NUMBER.
4. Use the dialing keys to edit the number.
• Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right.
• Press /DELETE or
• Press and hold /DELETE to erase the entire entry.
• Press and hold
5. Press NEXT
6. Press CID, DIR, /RECORD, or /DELETE to highlight one of the
following types:
• Home
• Cell
• Work
• Other
7. Press NEXT
8. Use the dialing keys (page 90) to edit the name.
• Press CID or /REPEAT to move the cursor to the left. Press DIR or
/SKIP to move the cursor to the right.
• Press /DELETE or
• Press and hold /DELETE to erase all characters.
Press # (pound key) to move the last word to the front. For example,
•
Johnson Charlie becomes Charlie Johnson when you press #
(pound key).
9. Press SAVE
NOTES:
• If the caller's name you received from the telephone service provider is all in capital letters,
the first letter of every word remains a capital letter, while other letters become lower case.
However, the next letter after the prefix "Mac", "Mc", "D'", "C'" or "O'", is kept as a capital letter.
For example, the "D" in "MacDonald" is kept as a capital letter. Another exception is that "VAN
DER" will be changed to "Van der".
• If the telephone number from the caller ID information has already been saved in the directory
under a different name, the new name will overwrite the old one.
BACKSP
/PAUSE to insert a dialing pause (a p appears).
REDIAL
.
. The telephone base displays EDIT NAME.
BACKSP
to confirm. The telephone base shows Saved.
SAVE
to erase a digit.
to erase a character.
104
. The telephone base