AT&T TL86103 User Manual page 141

Appendix
Display screen messages
Screen messages
No AC power.
System can only
access Line 1.
No answer.
Try again
No battery
No Bluetooth
device is ready
for connection.
No caller info
No entries
found.
Download from
SIM only ?
No entries
found.
Download from
Phone only ?
No messages
No signal.
Call ended.
Not available
at this time
Number
already saved
Out of range
OR
no power at
base
** Paging **
Paging all devices
PC CALL
PC CALL On hold
Place in charger
The base's corded handset is lifted during an AC power failure.
If there is an AC power failure, it is still possible to dial out and
receive incoming calls on line 1 using the corded handset.
The device(s) you are trying to transfer a call to is out of range,
off hook, or has no power.
The handset in the charger has no battery installed.
There is no Bluetooth device paired to the telephone system
when you press CELL A or CELL B/HEADSET
telephone base or handset.
The caller information is unavailable.
There are no entries found when you download a cell phone
directory from the cell memory.
There are no entries found when you download a cell phone
directory from your SIM card.
There are no entries found in either the cell or SIM card when
you download a cell phone directory from both memories.
There are no messages in the answering system.
The phone lost connection with the telephone base or did not
have a strong enough signal and the phone call ended.
Someone else is already using the directory or caller ID log.
When a handset tries to access the answering system or
Bluetooth menu during battery backup mode.
The telephone number you have entered is already in the
directory.
The telephone base has lost power, or the handset is out
of range.
The cordless handset is paged by the telephone base.
The telephone base is paging all devices.
PC line is on a call.
A call on PC line has been put on hold.
The battery is very low. The handset should be charged.
135
on the