AT&T TL86103 User Manual page 114

Answering system
Answering system settings
To record a new outgoing announcement:
Using the telephone base:
1. When the telephone base is in idle mode, press
to enter the main menu.
SELECT
2. Press
3. Press CID, DIR, /RECORD, or /DELETE to
highlight Mailbox 1 or Mailbox 2, and then
SELECT
press
4. Press SELECT
SELECT
5. Press
the tone. Press STOP when you are done."
6. Speak towards the telephone base to record your announcement. Press
STOP
to end recording. Your recorded announcement plays.
-OR-
1. When the telephone base is in idle mode, press /RECORD.
Press CID, DIR, /RECORD, or /DELETE to highlight Announcement,
2.
and then press
3. Press CID, DIR, /RECORD, or /DELETE to highlight Mailbox 1 or
Mailbox 2, and then press
the tone. Press STOP when you are done."
4. Speak towards the telephone base to record your announcement. Press
STOP
to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc and press
SELECT (see page 107).
to select Answering system.
.
again to select Announcement.
to select Record annc. The system announces, "Record after
SELECT .
SELECT
MENU
. The system announces, "Record after
108
Recording
announcement...
STOP