Take out locking ring and rotation prevention (3)
Loosen the nut of the cross shaft with socket Porsche spare part No.:
9R6.450.304.00
NOTE
Remove the bearing shell of the four-point bearing
Carefully tap out the shaft of the cross shaft lid with a rubber hammer
Press the ring gear out with the hydraulic press. Put the ring gear on aluminum plates
(Figure 2.8.7.6)
Version: 16.12.2014
Be careful when removing the cross shaft nut. The
bearing shell of the four-point bearing is behind it.
Powertrain
2.8.7.5
2.8.7.6
911 GT3 Cup (991)
MY 2015
67