Powertrain
2.9.20.7
2.9.20.8
2.9.20.9
2.9.20.10
911 GT3 Cup (991)
128
Put on the transmission shell assembly opening cover (arrow) with greased O ring
and fix in place with a locking ring (Figure 2.9.20.6)
Put on the shift control (3) and tighten with 10 Nm (7.4 ft-lb)
Put the shift control potentiometer (2) on the shift control
Calibrate the shift control potentiometer (6
Gearbox to gearbox bracket 65 Nm (48 ft-ib)
Shift cylinder to gearbox bracket and shift control tighten with 12 Nm (8,9 ft-lb)
NOTE
Mount the hydraulic lines of the central clutch operator
MY 2015
th
gear, 4.5 V)
The installation position of the shift cylinder (see figure
2.9.20.9). The groove must point to the rolex shaft.
Version: 16.12.2014