2.9.7.13
rd
Push the idler gear 3
gear (9) with idler gear bearing (10) on the guide sleeve (11)
th
(claws toward 4
gear) and thread onto the pinion shaft (Figure 2.9.7.14). Please
ensure in doing so that the oil holes of pinion shaft and guide sleeve are not directly
on top of each other (extensive oil supply).
rd
Push on selector sleeve 3
2.9.7.15)
th
Push the idler gear 4
gear (14) with idler gear bearing (13) (claws in the direction of
rd
the 3
gear) onto the guide sleeve (Figure 2.9.7.15)
th
Push on fixed gear 4
gear (C) (installation direction toward fixed gear: label of fixed
gear (C) and label of idler gear (14) on the same side) (Figure 2.9.7.15)
Version: 16.12.2014
th
/4
gear (12) with the label facing outward (Figure
Powertrain
2.9.7.12
2.9.7.14
2.9.7.15
911 GT3 Cup (991)
MY 2015
101