Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

Check the differential lid / differential housing pairing!
Lubricate the edge and put on the lid (2)
The inner threads must be free from residue of the screw locking device agent. All
screws (1) and threads must be degreased.
Bolting differential lid (2):
Tighten lid with 4 assembly bolts with 15 Nm Sequence 1, 11, 6, 16
•
Check the basic locking action
Clamp tool no. 52 into the vice (Figure 2.9.19.10)
Put on tool no. 53
Check the locking action with drag torque wrench no. 59
• Tighten 16 bolts with torque 15Nm+70° (apply Loctite 262 on thread)
Sequence 2, 12, 7, 17, 3, 13, 8, 18, 4, 14, 9, 19, 5, 15, 10, 20
• Remove assembly bolts
• Tighten 4 bolts with torque 15Nm+70° (apply Loctite 262 on thread)
Sequence 1, 11, 6, 16

Version: 16.12.2014

Powertrain
1
2.9.19.9
2.9.19.10
2.9.19.11
911 GT3 Cup (991)
MY 2015
2
123