Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

Removing the rear section
Bodywork
The standard bolts will be replaced by rivets.
Remove the Torx bolts from the carrier frame.
Fit the clamping claw to the carrier frame assembly and knock it loose from the
body.
Carry out grinding operations using a stainless steel wire brush. Always use special
grinding wheels for grinding aluminum. Use grinding wheels with grain size P80 to
P200. Observe corrosion protection measures.
Thoroughly remove paint from the glued joints (hatched).
4.15.3.1
Smooth any roughness on the lower rim that occurs during removal.
911 GT3 Cup (991)

Version: 16.12.2014

224
MY 2015