Powertrain
2.9.19.5
2.9.19.4
Insert the pressure piece (11); keep in mind rotational direction and 0 mark (Figure
2.9.19.4)
Insert bevel gear (12)
Insert cross pin (13) with bevel pinion (14)
Insert bevel gear (12)
Insert pressure piece (11), keep in mind rotational direction / mark!
Disk package (10):
Insert inner disk 3
Insert outer disk 3
Insert inner disk 2
Insert outer disk 2
Insert inner disk 1
Insert outer disk 1
Insert pressure plate (9) + disk spring (8) (observe installation position)
Insert ring (7)
Grease the axial needle bearing (6), mount into the ring and assemble into the
differential housing (round side of the bearing is pointing to the outside).
911 GT3 Cup (991)
Version: 16.12.2014
120
MY 2015