Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

8. Check the seal mounting position. For this purpose, measure at four points from
the crankshaft flange to the steel ring flat surface (arrows) using a vernier
caliper
1.6.5.10
NOTE
9. If the comparative values exceed the maximum difference, press in the seal
again using the fitting tool

Version: 16.12.2014

Measuring depth approx. 5 mm (0.2")
Maximum allowable tilt is 0.5 mm (0.2")
Engine
911 GT3 Cup (991)
MY 2015
35