Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

Bodywork
4.15.2.3
4.15.2.4
4.15.2.5
911 GT3 Cup (991)
220
Deeply mark the self-pierce rivets and pierce them using a solid carbide drill (Ø 6.7
mm).
•
•
•
Remove the damaged dome.
Preparation for the installation
Carry out grinding operations using a stainless steel wire brush. Always use special
grinding wheels for grinding aluminum. Use grinding wheels with grain size P80 to
P200. Observe corrosion protection measures.
Thoroughly remove paint from the glued joints (hatched) using an angle grinder.
MY 2015
Saw the defective dome using an air saw (2)
Pierce the rivet in the direction of the arrow
Heat the glued joints between dome and body using a hot air blower

Version: 16.12.2014